Camaro Z28 1982-1992

« Back

The Chevy Camaro’s styling and aggressive stance turns heads, but you can make it your own with custom decals and accessories provided by Danko Reproductions. We provide the supplies for you to customize your 1982 to 1992 Camaro/Z-28.

This is our own design full body kit for the Cherverolet Camaro, Z28, Berlinetta, Iroc-Z. Many of these items may be used independently. Designed to fit these years:1992,1983,1984,1985,1986,1987,1988,1989,1990,1991,1992. For more details and shipping quote, please call 305-934-8663 or email us through the website contact form.

Danko Inferno Custom Body Kit for 1982-1992 Camaro

Danko Inferno Custom Rear Wide Body

Danko Inferno Custom Rear Wide Body

This extremely popular Rear Wide Body Kit widens your quarter panels by 1-3/4". Panels should be bonded on. Both lower seams may be covered with trim if using Inferno Rear bumper and side fairings, but some body work is required for installation. Gas door simply installs as before. a 1"x1" cut must be made into quarter panel for gas door hinge clearance. This mod looks great as a stand alone item on any Camaro/Z-28. Dyna-weld body panel adhesive sold separately.

See GallerySEE GALLERY See GalleryDOWNLOAD INSTRUCTIONS

Danko Inferno Custom Front Fender Wide Body Caps

Our matching front Widebody Font Fender Caps widen your front fenders by 1-1/4". Panels should be bonded on. Both lower seams may be simply covered with trim if using Inferno front nose and side fairings, but some bodywork is required for installation. Front and Rear Widebody looks great as a stand alone item on any Camaro/Z-28. Dyna-weld body panel adhesive sold separately.

See GallerySEE GALLERY See GalleryDOWNLOAD INSTRUCTIONS

Dyna-Weld Body Panel bonding epoxy

This is a great semi-rigid epoxy body panel adhesive made by Dynatron for use in custom bonding and/or blending panels into your car. All cars pictured in our gallery were installed with this adhesive and it has been proven to be extremely durable. Requires 2 standard caulking guns. approximately 10-15 minute pot life. Kit Includes everything thing you need besides the caulking guns. 2 kits are recommended for entire Inferno body kit, and at least one kit is needed for only the Wide Body.

See GallerySEE GALLERY See GalleryDOWNLOAD INSTRUCTIONS

Danko Inferno 13-pc Custom Nose/Front Bumper Kit

13-Piece Front End Includes: Upper and lower Nose Sections (2), Blinker Brackets (2), Nose Side Panels (2), Lower Grille Inserts (2), Headlight Tray Set (2), Eyebrows (2), Hood Wedge (1). Dyna-Weld Adhesive (sold separately) is required for installation of hood wedge fairing and optional eyebrow cut-outs.

See GallerySEE GALLERY See GalleryDOWNLOAD INSTRUCTIONS

Danko Inferno 3-pc Custom Rear Bumper Kit

Rear End includes: Rear Center Section (1), Rear Side Panels (2). Sections bolt together and then unit bolts up to Camaro’s factory bolt locations. Bumper can be custom made in many ways including dual exhaust ports and without rear vents.

See GallerySEE GALLERY See GalleryDOWNLOAD INSTRUCTIONS

Danko Inferno 4-pc Custom Side Fairings

Side Panels Include: Lower Rocker panels (2), Lower Door Fairings (2). Panels install entirely with rivits and trim, or can be bonded and blended into the body with (optional) Dyna-Weld epoxy adhesive (sold Separtely) for a smooth custom look (pictured)

See GallerySEE GALLERY See GalleryDOWNLOAD INSTRUCTIONS

Danko Inferno Custom Taillight Covers

Our Custom Inferno Taillight Covers install into OEM Camaro taillights with pop rivits or small small screws. Light holes come pre-cut but some trimming may be required.

See GallerySEE GALLERY See GalleryDOWNLOAD INSTRUCTIONS

Danko Inferno Custom Rear Wing/Spoiler

This very aggressive and very functional one-piece Inferno Rear Spoiler is our original design. Wing bolts up with mounting studs. Drilling into trunk lid is required.

See GallerySEE GALLERY See GalleryDOWNLOAD INSTRUCTIONS

DANKO Inferno Hood Scoops

Our Inferno Hood Scoops Install with screws or Rivets. Some body work required for installation.

See GallerySEE GALLERY See GalleryDOWNLOAD INSTRUCTIONS

Danko Inferno Heat Extractor Vents

These heat extractor vents look great facing either way anywhere on the hood, or on the upper fenders. Vents come with a 2" flange for bonding and blending but can also come with mounting studs and gaskets. Make sure to specify which one when ordering.

See GallerySEE GALLERY See GalleryDOWNLOAD INSTRUCTIONS

Inferno 1/8" Smoked Lexan Headlight covers

Inferno 1/8" Smoked Lexan Headlight covers are custom cut to fit your Inferno nose and can be installed with small stainless screws or Velcro brackets (not included).

See GallerySEE GALLERY See GalleryDOWNLOAD INSTRUCTIONS

Product Name

1982-1984 CHEVROLET CAMARO Z28 DECAL STRIPE KIT

We provide you with the most accurate and complete decal systems. Most vendors sell decals one piece at a time .

THESE ARE GM LICENSED RESTORATION DECAL KITS

This Decal Kit Includes all of the following decals in the exact GM color of your choice. This kit is produced in strict accordance within General Motors specifications, and is on UV protection coated 3M vinyl

  • 2 Hood blackout decals
  • 2 Front fender stripes
  • 2 Front bumper stripes
  • 2 Door stripes
  • 2 Rear quarter panel stripe
  • 2 Rear bumper stripes
  • Squeegee and Instructions

Color Choices:Color Code

Medium Gold/Light Gold/Black (1982)…..Gold-A

Medium Gold/Light Gold/Black (1983-84)…..Gold-BMedium Silver/Light Silver/Black…..SilverMedium Charcoal/Light Charcoal/Black (1982)…..Charcoal Medium Orange/Light Orange/Black…..Orange Medium Red/Light Red/Black (1982)…..Maroon Medium Blue/Light Blue/Black…….Blue Med. Blue Metallic/Light Blue Metallic/Black (1982)……Blue Metallic-A Med. Blue Metallic/Light Blue Metallic/Black(1983-84)…..Blue Metallic-B

Danko Inferno Custom Body Kit for 82-92 Camaro

Our Own design full body kit for the 82-92 Camaro, z/28, Berlinetta, Iroc-Z. Please call 305-934-8663 or email for pricing and information. Inferno Picture Gallery<

See GallerySEE GALLERY See GalleryDOWNLOAD INSTRUCTIONS